Paasche Talon Tg-3f User Manual
| Expert Review: At first glance this airbrush seems very similar in design to the Devilbiss DAGR which is a good start. On closer inspection there are some major differences. Primarily its versatility; the Talon has four available nozzle sizes ranging from 0.2mm to 0.66mm which is a great range for custom automotive art. There is also the option of the fan-cap that works with the 0.66mm nozzle set; perfect for primers and candies. Everything works great on the Talon but you need to keep the nozzle and air-cap screwed on tight; like really tight. All in all the cost to performance ratio on this series can’t be beat and the parts are very affordable too. Price Range $70 to $100. Design: ★★★★★ Quality: ★★★★ Cost to Performance Ratio: ★★★★★ |
Similar models: Badger Patriot, Iwata Eclipse, Harder Steenbeck Evolution
The newest addition to the Paasche Airbrush line is the gravity feed “Talon”. The Talon was designed to be Paasche’s high end airbrush and will deliver the highest level of detail and control. The trigger and air valve have been redesigned to allow for a smoother stroke as well as ease of assembly and durability. The Talon is 100% made in the USA at Paasche’s Chicago plant.
Talon TG
-.38mm Fluid Tip, Needle and Crowned Cap
-.4 Ounce Cup with Cover
-Sprays Hair Lines to 1 1/2 Inch Patterns
-Cutaway Handle with Preset Needle Stop.
-New Trigger, Piston and Air-valve style.
- Jul 23, 2018 Paasche TG-3F Double Action Gravity Feed Airbrush. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our fan aircap wider patterns up to 3-inch. I can not fully speak on behalf of Paasche, and the products they produce. What I can say is that the Paasche Talon airbrush was junk, and Paasche.
- TG-3F Double Action Gravity Feed Airbrush. The Paasche TG-3F is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. Included with the airbrush are all three available spray heads, which allow the TG to be used for a wide range of airbrushing applications.
- This is an honest review of the Paasche Talon TG 3F. OrcPainterNerd walks you through the good and the bad about the Talon TG 3F to help you make an informed decision.
- Dallas Model Works. You are not signed in. Advanced Search; Manufacturers; Railroads; Favorite Railroads.
| |
| |
| |
| |
|
Talon TS
-BOTTLE-FEED AIRBRUSH.
-Double action internal mix.
-Fine detail control.
-Anodized Aluminum Handle.
Paasche Talon TG-3F Airbrush for sale at SprayGunner. Paasche TG-3F Talon Airbrush Set. The Talon was designed to be their high end airbrush and will deliver the highest level of detail and control.
| |
|
Paasche Tg Talon Airbrush
Double Action Gravity Feed Airbrush!
The Paasche TG-3F is a double action gravity feed airbrush featuring a chrome plated body and anodized aluminum handle for durability.
Included with the airbrush are all three available spray heads, which allow the TG to be used for a wide range of airbrushing applications.
Also included is a special fan aircap.
The TG is Paasche's finest detail airbrush allowing the user to achieve hair line detail and, using the fan aircap, wider patterns up to 3 inches.
A PTFE packing allows the TG to handle any water or solvent based paint.
Clean up is as simple as spraying your paint cleaner though the airbrush and wiping off the needle.
The TG is best used for those requiring high end detail, including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc.
Phantom power support. SDI Rates1.5G, 3G, 6G, 12G. Camera control pro 2.x user manual. Analog Audio Inputs2 x XLR analog switchable between mic, line and AES audio.
The TG airbrush is made and assembled in the US and includes the following.
- TG#2 double action airbrush with .4 oz cup
- Size 1 & 3 spray heads
- Fan aircap
- Hanger
- Two wrenches
- 6' braided hose
- Lessons booklet and manual Achieve patterns from a hair line to 1-1/4 inch
- Handle includes a needle stop to assist with consistent paint release
- Set includes all three head sizes and special fan aircap (.25mm, .38mm, .66mm)
| Copy this TG-3F Talon Airbrush Set to your MY ACCESSORIES roster. | |
|
Email this page to a friend
PA-542-TG3F
TG-3F Talon Airbrush Set
(w/3 Heads and Fan Aircap)
Our Price:$159.84
MSRP: $185.00
You Save 14%
Member Price (Order > $100): $143.86
Sign Into Save 22%
This item is ready to ship.
Member Prices shown realized by Discount applied in Shopping Cart. Savings shown are calculated versus MSRP. You must be signed in to receive Discount.
MSRP: $28.75
Member Price (Order < $100): $24.09
Member Price: (Order > $100): $22.36
New
MSRP: $5.24
Member Price (Order < $100): $4.38
Member Price: (Order > $100): $4.07
MSRP: $9.40
Member Price (Order < $100): $7.93
Member Price: (Order > $100): $7.36
MSRP: $4.56
Member Price (Order < $100): $3.63
Member Price: (Order > $100): $3.37
Sale
MSRP: $8.22
Member Price (Order < $100): $6.25
Member Price: (Order > $100): $5.80
Sale
MSRP: $28.75
Member Price (Order < $100): $24.09
Member Price: (Order > $100): $22.36
New
MSRP: $3.40
Member Price (Order < $100): $2.85
Member Price: (Order > $100): $2.65
See more products from Paasche Airbrush Company
HO Scale, HO Gauge, N Scale, N Gauge