Mackie Ppm 1008 Powered Mixer User Manual
Sold Out!
PPM1008 Professional Powered Mixer Features:
Powered loudspeakers last. Save the shipping box! Read This Page! We realize that you must be keen to try out your new powered mixer, but please read the safety instructions on page 2, and this page first. Setup The PPM1008 powered mixer is designed to be easy to operate, and to be set up quickly. Sep 12, 2012 Ultra-light and completely self-contained, the Mackie PPM608 Professional Powered Mixer features two robust 500W power amps for mains or monitors. With 1000 watts of system power, this mixer. Ultra-light and completely self-contained, the Mackie PPM1008 professional powered mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, the PPM1008 is in a class of its ownfully capable of powering a huge system (try a couple S215s AND a pair of C300s!).
- Full-featured 8-channel, 1600W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+ processor
- 800W + 800W Mackie designed Class-D, Fast Recovery power amplifiers
- 32-bit RMFX+ processor featuring 24 'Gig Ready', useable reverbs, choruses, and tap delay for live applications
- 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
- New Dedicated In-line Compression provides increased presence and punch for vocals and instruments
- 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
- Mackie's 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels
- 2 built-in DI boxes for direct instrument connections
- Separate Monitor and FX auxiliary sends
- Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig
- Built like a tank and armored in poly carbonate ABS, the PPM1008 features classic Mackie rounded front chassis design. So if the PPM rolls on its face during transport the controls are recessed and protected.
Nov 04, 2018 Buy Mackie PPM1008 8-Channel 1600-Watt, Ultra-light Professional Powered Mixer: Powered Mixers - Amazon.com FREE DELIVERY possible on eligible purchases. Enjoy the lowest prices and best selection of Mackie Powered Mixers at Guitar Center. Most orders are eligible for free shipping!
Ultra-light and completely self-contained, the Mackie PPM1008 professional powered mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, the PPM1008 is in a class of its ownfully capable of powering a huge system (try a couple S215s AND a pair of C300s!) We custom designed the PPM1008 with Class-D amps, which are cool-running and boast maximum efficiency, keeping your sound pumping until they start kicking people out. We had to include Mackie's proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter's attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM1008 to its maximum output, distortion free!
Most powered mixers out there have either a limited set of mixing tools - keeping your mix decidedly average - or they cram in a mind-boggling amount of lame effects that you would never use. Every professional carries the right tools for the job, so the PPM1008 comes with a great-sounding, highly useable toolkit:
- Premium Mackie preamplifiers ensure transparent, low-noise/high-headroom characteristics right at the front of the mixer. The PPM1008 offers 8 mic/line channels with trusted Mackie preamplifiers.
- True 48V phantom power allows every condenser mic to perform at its full potential.
- Legendary 3-band active EQ straight off the tremendously popular VLZ3 mixer series. Sweetening any channel is a breeze.
- Individual channel inserts (ch. 1-6) allow compressors and other outboard processing on critical instrument or voice channels. Don't leave the lead singer hanging!
- Dedicated in-line compressors on channels 1-4 bring simple but sweet dynamics to our PPM mixers.
- Dual graphic EQs are provided for use with mains and monitors. These EQs feature tight, constant-Q Filters that effect only the frequency range you've intended, unlike many inexpensive built-in graphic EQs that will remain nameless.
- Simple stuff like useable main and monitor output metering make a huge difference in your mix. Sorry, but 5 LED meters at the output doesn't tell you that you're about to clip. Our high-resolution 12-segment meters enable more visibility of your signal, and the super quick response of the meters allows what you see to translate quickly and easily to what you hear.
The all-new RMFX+ (Running Man FX) 32-bit effects processor brings 'gig ready,' useable effects to your mixes. Why scroll through hundreds of bizarre effects, like 'ghost ambience?' Yeah, like anyone even knows what that means. Or how about winners like Òdelay+phaser2Ó, which you'll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Also, the RMFX+ is the first onboard processor to feature a user tap function. So if you want to use a delay, but our preset delay time doesnÕt work, you can tap it in instantly! Basically, weÕve delivered a full rack of gear at your fingertips that is easy to master, allowing you to look really and sound really good at your next gig. Really, really good.
Mackie Ppm1008 Manual
The PPM1008 is fully armored inside a solid steel chassis, helping to protect the electronics from any potential environmental hazard (Think beer.) Extremely durable polycarbonate ABS end caps will protect the PPM1008 from years of abuse caused by tossing it in and out of the truck or falling off the stool at rehearsal. Each PPM1008 features rounded front with recessed controls, so if it rolls on its face in the van or gets kicked over at the show, you can be sure that it will emerge damage-free. Two metal side handles allow you to easily pick it up and get going. ItÕs ultra-light so you wonÕt need both hands!
Look, we want to make things as easy for you as possible. Matching speakers to amps can suck the fun out of an otherwise pleasant trip to the music store. Keeping that in mind, PPM mixers and Mackie passive speakers were made for each other. We even included the one-touch Precision Passive EQ button, which is designed to make our speakers sound better than ever. From our popular C series (C300/200) to our S series (S200/S400), we designed our mixer to match the power requirements of our passive speakers perfectly. Try driving a pair of S225 15' speakers off someone else's mixer. You can almost smell the smoke now! Yet this is child's play using a PPM and a pair of our S225's. We easily provide enough power for a complete system. In fact, weÕve got the bollocks to drive two of our S215 15Ó 2-way speakers off the mains AND a pair of C300s as Monitors without needing outboard amps. Others may try but, ultimately, donÕt provide the necessary power. So if you want a truly professional set of tools for your next gig, including a Mackie mixer, onboard compressors, Fast Recovery amplification, twin graphic EQs, and 'gig-ready' effects, pair up a PPM1008 and any Mackie Precision Passive loudspeakers for the ultimate, portable, professional P.A. system.
Product Specs
Condition | B-Stock items are sold by an authorized dealer or original builder, but have been opened, blemished, or used in some manner.learn more |
Brand | Mackie |
Model | PPM1008 |
Categories | Mixers, Power Amps |
Accepted Payment Methods
- Paypal
Shipping Policy
Mackie Ppm1008 Powered Mixer
Ships from Austell, GA, United States to:
- Continental U.S.
- €0.00EUR
-Domestic items TYPICALLY ship within 24 business hours of a CLEARED payment.
- UPS tracking and insurance is included.
- Express shipping available.
- Items weighing a pound and under will ship via USPS First Class or Priority Mail.
- Shipments may incur taxes upon delivery.
- Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
- Attention: UPS ground transit is on business days only and will not include weekends.
Tax Policies
Taxes are charged in the following regions either by the seller, per their tax policy, or by Reverb as a Marketplace Facilitator:
Florida | |
Georgia | |
Hawaii | |
Illinois | |
Louisiana | |
Michigan | |
Mississippi | |
North Carolina | |
Alabama* | |
Arizona* | |
Arkansas* | |
California* | |
Colorado* | |
Connecticut* | |
District of Columbia* | |
Idaho* | |
Indiana* | |
Iowa* | |
Kentucky* | |
Maine* | |
Maryland* | |
Massachusetts* | |
Minnesota* | |
Nebraska* | |
Nevada* | |
New Jersey* | |
New Mexico* | |
New York* | |
North Dakota* | |
Ohio* | |
Oklahoma* | |
Pennsylvania* | |
Rhode Island* | |
South Carolina* | |
South Dakota* | |
Tennessee* | |
Texas* | |
Utah* | |
Vermont* | |
Virginia* | |
Washington* | |
West Virginia* | |
Wisconsin* | |
Wyoming* | |
*Marketplace Facilitator State. Reverb collects tax on the sellers behalf. Learn More |
Return Policy
Return Window
This product can be returned within 30 days of receipt.General Terms
Items must be returned in original, as-shipped condition with all original packaging and no signs of use. Buyer assumes responsibility for all return shipping costs unless the item was not received as described.
Samsung gt s5830i user manual pdf. The f1.7 lenses have Smart Optical Image Stabilization, Real-Time HDR mode and other features for taking great photos.
Refunds
Buyer receives a full refund in their original payment method less any shipping costs.
Special Conditions
International Customers:
Mackie Direct does not pay any postage (to and from, taxes, duties and brokerage fees) on international returns. All transportation costs will be the buyer's responsibility.
Domestic Customers:
Customer is responsible for transportation of the item back to Mackie Direct(this includes return shipping for our non-local customers). For returns of product within the United States Mackie Direct will pay for shipping of the new replacement item back to the customer.
Special Exceptions:
The following products are not eligible for return and will be sent back to you at your cost and expense if received by us:
Any product not purchased from Mackie Direct.
Any products with missing, damaged or altered serial numbers.
Any product that is returned without all original packaging and accessories, including the retail box, manuals, and all other items originally included.
Any product that has been serviced without our express permission.
Customer must contact us within 30 days of delivery to request a return.
Product must be in factory sealed never opened resalable condition to qualify for a full refund.