User Manual Oregon Scientific Weather Station Bar806hga

View and Download Oregon Scientific BAR208HGA user manual online. Advanced Weather Station with Atomic Time. BAR208HGA Weather Station pdf manual download. View and Download Oregon Scientific BAR806HG user manual online. Solar Weather Station with Outdoor Hygrometer. BAR806HG Weather Station pdf manual download. Also for: Bar806hga. May 03, 2012  Process of resetting an Oregon Scientific remote sensor when the connection has been lost or the batteries need to be replaced. DIY #2 - Acu-Rite weather station sensor fix - Duration: 10:46. Advanced Weather Station with Atomic Time Model: BAR208HGA USER MANUAL EN OVERVIEW FRONT VIEW (FIG 1). Contents of the user manual are subject to change without notice. SPECIFICATIONS TYPE DESCRIPTION. ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to.

Oregon Scientific Magic Weather Station User Manual. See Prices; Oregon Scientific Weather Radio BA900. Oregon Scientific Crystal Weather Station User Manual. Oregon Scientific Weather Radio User Manual. See Prices; Oregon Scientific Weather Radio BAR386. Oregon Scientific Weather Radio User Manual.

Advertising

INTRODUCTION

Oregon Scientific Wireless Weather Station

Thank you for selecting this Oregon Scientific

TM

Wireless

Weather Forecaster with Temperature Display and
Self-Setting Atomic Clock (BAR386A). This clock is supplied
with a remote sensor (THN132N) and can support up to 3
sensors in total (additional sensors sold separately).

NOTE Please keep this manual handy as you use your
new product. It contains practical step-by-step instructions,
as well as technical specifications and warnings you should
know about.

CLOCK OVERVIEW

FRONT VIEW

1. SNOOZE
2. ALARM: View alarm status; set alarm

BACK VIEW

1: /

: Increase / decrease setting; activate /

deactivate clock reception signal

2: MODE: Change settings / display
3. CHANNEL: Switch remote sensor display
4. MEM: View current, maximum and minimum

temperature / humidity

5. °C / °F: Select temperature unit
6. TEMP HI / LO : Change settings or enable / disable

hi or lo temperature alarm for channel 1

7. RESET: Reset unit to default settings
8. Battery compartment

LCD DISPLAY

1. Sensor battery low
2. Ice warning is active
3. Pressure trend
4. Weather forecast
5. Alarm set
6. AM / PM mode selected
7. Clock signal reception
8. Clock
9. Sensor reception icon
10. Hi / lo temperature alarm
11. Outdoor temperature trend
12. Outdoor temperature
13. Max / min icon
14. Main unit battery low
15. Indoor temperature trend
16. Indoor temperature
17. Max / min icon
18. Main unit sensor icon
19. Alarm mode
20. Moon phase
21. Day and month display

REMOTE SENSOR (THN132N)

GETTING STARTED

BATTERIES

Insert batteries before first use, matching the polarity (+
and -). Press RESET after each battery change.

SENSOR DATA TRANSMISSION

indicates main unit batteries are low.

Scientific

NOTE Do not use rechargeable batteries. We recommend
that you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
freezing.

REMOTE SENSOR

4. Close the battery compartment.
5. Secure the sensor in the desired location using the wall

mount or table stand.

For best results:
• Place the sensor out of direct sunlight and moisture.
• Do not place the sensor more than 30 m (100 ft) from

the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls, and
furniture.

• Place the sensor in a location with a clear view to the

sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may
affect battery performance and signal transmission.

The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.

Standard Alkaline batteries contain significant amounts of
water. Because of this they will freeze in low temperatures
of approximately -12°C (10°F). Disposable Lithium batteries
have a much lower threshold for temperature with an
estimated freezing range of below -30°C (-22°F).

Wireless ranges can be impacted by a variety of factors
such as extremely cold temperatures. Extreme cold may
temporarily reduce the effective range between the sensor
and the base station. If the unit's performance fails due to
low temperature, the unit will resume proper functioning
as the temperature rises to within the normal temperature
range (i.e. no permanent damage will occur to the unit due
to low temperatures).

The sensor reception icon in the remote sensor area
shows the status.

To search for a sensor:
Simultaneously, press and hold MEM and CHANNEL for
2 seconds.

NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.

��

��

��
��
��
��

��
��
��
��

��

��


The sensor collects temperature readings approx. every
40 seconds and sends them to the main unit. The main
unit can collect data from up to 3 sensors.

ICON

DESCRIPTION


and “- - . -“
(Outdoor
temperature area)

The sensor cannot be found.
Search for the sensor or check
batteries

A channel has been found
and sensor signal is being
received

Main unit is searching
for the sensor(s)

1. LED indicator

To set up the sensor:
1. Slide open the battery door.
2. Insert the batteries, matching the polarity (+ / -). Reset

the sensor after each battery change.

GTA 5 for Android Apk Data (Full Version) GTA 5 apk is not available officially on play store and if available it includes some charges. In GTA 5 android game there are many things which will grab your attention towards the game. GTA5 Apk for Android, Obb and Data File Free For Android, we provided links below it will Download GTA 5 Apk and Data Free for Android with one single click, so now you can easily download the Full Version of GTA 5 Data and the other Amazing Amazing games with no cost from our website entertainpoint.com. Gta apk data free download for android. GTA 5 apk is an Open world game on android platform. The Grand Theft Auto 5 has become popular after the release of game on android by rockstar team. GTA 5 mod apk is free to download with step by step guide to get unlimited everything.

3. Select a channel. Make sure you use a different channel

for each sensor.

1. Wall mount
2. Battery compartment
3. Battery door
4. Table stand
5. RESET
6. CHANNEL switch

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time
automatically once it is within range of the WWVB-60
signal from the atomic clock in Fort Collins, Colorado.

The clock collects the radio signals whenever it is within
3219 km (2000 miles) of a signal.

Wireless Weather Forecaster with

Temperature Display and Self-Setting

Atomic Clock

Model: BAR386A

USER MANUAL

NOTE Initial reception takes 2-10 minutes for first set up
or when RESET is pressed. Once complete, the reception
icon will stop blinking. If the signal is weak, it can take up
to 24 hours to get a valid signal.

RECEPTION SIGNAL

Clock signal reception indicator:

SET CLOCK

If the clock signal reception is enabled and a signal is being
received the clock does not need to be manually set.

1. Press and hold MODE for 2 seconds.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: US time zone (Pacific (P), Eastern

(E), Central (C), and Mountain (M)), hour, minute, year,
month / day format, month, day and language.

NOTE The language options are (E) English, (D) German,
(F) French, (I) Italian, and (S) Spanish.

Press MODE to choose between the clock with seconds
and clock with weekday display modes.

ALARM

To set the alarm:
1. Press and hold ALARM for 2 seconds.
2. Press / to set hour / minute.
3. Press ALARM to confirm. indicates alarm is ON.

To enable / disable the alarm:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm ON / OFF.

To silence the alarm:
• Press SNOOZE to silence it for 8 minutes.

OR
• Press any key except SNOOZE to turn the alarm off

and activate it again after 24 hours.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius based on barometric
pressure trend readings.

ICON

DESCRIPTION

Clear

Cloudy

Rainy

Partially Cloudy

To enable and force a signal search:
Press and hold for 2 seconds.

To disable the signal reception:
Press and hold for 2 seconds.

STRONG SIGNAL WEAK SIGNAL NO SIGNAL

To toggle temperature unit:
Press °C / °F.

To view outdoor sensors temperature readings:
Press CHANNEL.

To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds. Each sensor’s
data is displayed for 3 seconds.

To end auto-scan:
Press CHANNEL or MEM.

To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.

To clear the records:
Press and hold MEM for 2 seconds.

TEMPERATURE

NOTE The maximum operating altitude for weather
forecast is 2500m (8202 ft).

BAR386A_M_R6

2006.4.7, 4:37 PM

1

Etekcity Digital Body Weight Bathroom ScaleWith the 6mm thick tempered glass, the Etekcity Digital Body Weight Bathroom Scale has a strong design to provide exceptional sturdiness. It comes with a large platform measuring 12″ x 12″ to give you a wide space to step on.This scale features the 4 latest high precision sensors to deliver highly accurate measurements. This unit is not wireless, otherwise, it works well3. Cons. Greater good digital scale user manual.

Advertising
Popular Brands
Popular manuals
Advertising

Advanced Weather Station

with Atomic Time

Model: BAR208HGA

USER MANUAL

EN

Oregon Scientific Weather Station Bar206a

OVERVIEW

FRONT VIEW (FIG 1)

1. Remote sensor reception indicator
2. Moon phase reading
3. Weather forecast
4. Indoor temperature with temperature trend
5. Clock signal reception indicator
6. MODE: Change settings / display
7.

/

: Increase / decrease settings; activate / deacti

vate clock reception signal

8. Outdoor temperature with temperature trend
9. Outdoor humidity with humidity trend
10. Weather warning message
11. Indoor humidity with humidity trend
12. Time zone
13. Clock with weekday
14. MEM: View current, maximum and minimum

temperature / humidity

15. LIGHT: Activate backlight for 5 seconds
16. Ice alert LED indicator

BACK VIEW (FIG 2)

6

1

2

3

4

5

7

14

8

9

10

11

13

15

16

12

1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings

REMOTE SENSOR (FIG 3)

1. LCD display
2. LED status indicator
3. Wall mount hole
4. RESET hole
5. CHANNEL switch
6. Battery compartment

GETTING STARTED

INSERT BATTERIES

1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.

LOCATION

MEANING

Clock / alarm and

Main unit batteries low

Indoor temperature area

Outdoor temperature area

Sensor batteries low

REMOTE SENSOR

The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment with a small Philips

screwdriver and insert batteries, matching the polarity.

2. Select a channel then press RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main unit

using the table stand or wall mount.

TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not more
than 5 ft and which can shield it from direct sunlight or wet
conditions for an accurate reading.

NOTE Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold

+ MODE.

The sensor reception icon in the remote sensor area shows
the status:

ICON

DESCRIPTION

Main unit is searching for sensor(s).

A channel has been found.

The sensor cannot be found.

TIP The transmission range may vary depending on many
factors. You may need to experiment with various locations to
get the best results.

1

2

1

2

3

4
5

6

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with WWVB-60 signal, within 3200km (2000
miles) of Fort Collins Colorado.

To enable / disable signal reception:

Press and hold to

enable or

to disable signal reception.

NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold

to force another signal search.

Clock signal reception indicator:

STRONG SIGNAL WEAK SIGNALNO SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception first.
1. Press and hold MODE.
2. Press

or

to change the settings.

3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format, hour,

minute, year, calendar mode (day – month / month
– day), month, day and language.

Select the time zone: (P) Pacific, (E) Eastern, (C) Central or
(M) Mountain.

NOTE The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).

To select display mode:
Press MODE to choose between clock with seconds /
weekday / calendar / moon phase.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius (US- with a 75%
accuracy).

Sunny

Partially Cloudy

Cloudy

Rainy

Snowy

WEATHER WARNING MESSAGE

The weather warning messages provide indications of
probable circumstances that may arise based on the weather
station’s calculations. The meanings for the warnings are
illustrated below:

Warning

Meaning

Risk of high temperatures

Risk of fast wind speeds

Risk of a storm

Risk of foggy conditions

Risk of icy conditions

TEMPERATURE AND HUMIDITY

To toggle temperature unit:
Press °C / °F.

To auto-scan between sensors:

Press and hold

+ MEM to display each sensor’s data for

3 seconds.

To end press

.

To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.

To clear the records:
Press and hold MEM.

ICE WARNING

If the channel 1 sensor falls between 3°C to -2 °C (37°F to
28°F), LED indicator will flash, and will stop flashing once the

Advertising
Popular Brands
Popular manuals