Rainbird Esp Me Controller User Manual
- Rain Bird Esp Me Troubleshooting
- Rain Bird Esp-me Enhanced Modular Controller User Manual
- Rainbird Esp Me Controller Detail
- Rain Bird Esp Me Controller User Manual Pdf
- Rain Bird Esp Me Controller Manual
- Rain Bird Controller Esp Me Owners Manual
- Rain Bird Esp-me Controller User Manual
4 Item(s)
Rain Bird Esp Me Troubleshooting
View online Operation & user’s manual for Rain Bird ESP-Me Controller or simply click Download button to examine the Rain Bird ESP-Me guidelines offline on your desktop or laptop computer. Jan 17, 2014 How to program a RainBird ESP-ME Controller. How to program a RainBird ESP-ME Controller. Skip navigation. How to program a Rain Bird ESP series sprinkler timer. Connect Rain/Freeze Sensor (optional) Connect Custom Wiring (optional) The ESP-TM2 controller can be set to obey or ignore a rain If desired, the provided 120 volt power cord can be sensor. Removed and replaced with a custom wiring. Refer to the Rain Sensor section under Advanced To remove the factory installed power cord and connect Programming. ESP-Me Enhanced Modular Controller Simple, ˜ exible, reliable. At Rain Bird, we believe in the Intelligent Use of WaterTM and in our responsibility to develop products and technologies that use water e˜ ciently. The ESP-Me is no exception. Building on Rain Bird’s legendary Extra Simple Programming, the ESP-Me controller o˚ ers a broad range.
GridList
ESP-TM2 12 Station WiFi Irrigation Controller including LNK WiFi Module
Regular Price: $461.90
Special Price $230.95
- Add to Compare
LNK WiFi Module for Rain Bird ESP-TM2 and ESP-Me Series Controllers
Regular Price: $139.13
Special Price $97.39
- Add to Compare
ST8I-2.0, 8-Zone Smart Irrigation WiFi Sprinkler Timer (indoor)
Regular Price: $189.74
Lenovo YOGA 720 YOGA 720-13IKB YOGA 720-15IKB User Guide Read the safety notices and important tips in the included manuals before using your computer. Notes. Before using the product, be sure to read Lenovo. Note: For Lenovo YOGA 720-13IKB, the AC power adapter jack is compatible with Type-C USB 3.0 devices. Lenovo yoga 720 13ikb user manual. Lenovo YOGA 720-13IKB Pdf User Manuals. View online or download Lenovo YOGA 720-13IKB User Manual.
Special Price $152.90
- Add to Compare
ST8O-2.0: 8-Zone Smart Irrigation WiFi Sprinkler Timer (outdoor)
Regular Price: $229.00
Special Price $194.65
- Add to Compare
4 Item(s)
GridList
I see a message on the DISPLAY “14NOMOD” what does it mean?It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is flashing, what does it mean?It means that you have a programming error. Either there are: no start times, no run times, or no watering days selected. The controller ships from the factory with the following settings:
1 Start time of 8:00 AM, 10 minute run time for the first 4 stations (base module) and all days set to ON.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?Yes, 3 station modules are compatible with the new ESPME.
Do I need to have a 9V battery installed to backup anything?No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
No.
I see a message on the DISPLAY “14NOMOD” what does it mean?It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
Rain Bird Esp-me Enhanced Modular Controller User Manual
My Alert light is illuminated and not flashing, what does it mean?It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?Rainbird Esp Me Controller Detail
Yes, 3 station modules are compatible with the new ESPME.
Can the ESPME run more than 1 program at a time?No.
Do I need to have a 9V battery installed to backup anything?No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is illuminated and not flashing, what does it mean?It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?Yes, 3 station modules are compatible with the new ESPME.
I see a message on the DISPLAY “14NOMOD” what does it mean?It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is illuminated and not flashing, what does it mean?It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?Yes, 3 station modules are compatible with the new ESPME.
Can the ESPME run more than 1 program at a time?No.
Do I need to have a 9V battery installed to backup anything?No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
Rain Bird Esp Me Controller User Manual Pdf
Can the ESPME run more than 1 program at a time?No.
Do I need to have a 9V battery installed to backup anything?Rain Bird Esp Me Controller Manual
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
Can the ESPME run more than 1 program at a time?No.
Do I need to have a 9V battery installed to backup anything?Rain Bird Controller Esp Me Owners Manual
Rain Bird Esp-me Controller User Manual
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.