Owners Manual Dsc Model Pk5501 User Manual
Free Download Sony Cyber-shot DSC-HX99 PDF User Manual, User Guide, Instructions, Sony Cyber-shot DSC-HX99 Owner's Manual.
Sony Cyber-shot DSC-HX99 equipped with a 18.2 MP back-illuminated Exmor R CMOS sensor, which work with the BIONZ X image processing engine combined with a front-end LSI delivers stunning images and high-speed continuous shooting up to 10 fps.
The Zeiss Vario-Sonnar 30x (24-720mm) optical zoom lens delivers brilliant sharpness, rich contrast and low-distortion images. The Optical SteadyShot Image Stabilization ensures sharp stills during handheld and telephoto shooting.
The Cyber-shot DSC-HX99 can capture stunning 3840x2160/30p 4K video with full pixel readout and no pixel binning.
/qumi-user-manual-screen-mirroring-laptop.html. Ensure the projector is switched to that input using the “Source” button on the projector.
.The control panel must be in the attack-resistant enclosure (DSC Model CMC-1 or PC4050CAR). The installer should advise the users and note in the User’s Manual:.Service organization name and telephone number. PK5501. PK5516. The following optional subassembly modules also bear the SIA FAR classification and may be used if. Sony Cyber-shot DSC-H400 PDF User Manual / Owner’s Manual / User Guide offers information and instructions how to operate the Cyber-shot DSC-H400, include Quick Start Guide, Basic Operations, Advanced Guide, Menu Functions, Custom Settings, Troubleshooting & Specifications of Sony Cyber-shot DSC.
Dsc Pk5501 Keypad User Manual. Some refer to it as an owner's manual, an instruction manual, an end user handbook, an operator's DSC PK5501 KEYPAD USER MANUAL. Hello, Hopefully you have. Mighty Napco model 8000-dse autoclave manual Dsc pk5501 keypad user manual. Find great deals on eBay for DSC Alarm Keypad in Home. Download Download Dsc z823 user manual Read Online Read Online Dsc z823 user manual dsc pk5501 manual dsc power series 433 manual dsc 9047 user manual dsc 5020 user manualdsc power 832 programming manual dsc pk5500 dsc 5010 user manual dsc lcd5500 keypad manual. And used in accordance with the instructions, may cause harmful interference to radio communications. Baby Owners Manual Baby Owners Manual PDF Download Free. Dsc User Manual 1616 PDF online, free. Get reading Download Dsc Pk5501 Keypad Manual PDF PDF book and download Download Dsc Pk5501 Keypad Manual PDF PDF book for the emergence of where there is compelling content that can bring the reader hooked and curious.
Other highlights include pop-up OLED Tru-Finder EVF, 3-inch 180° tilting LCD touchscreen features Touch Focus / Touch Shutter / Touch Pad, RAW format image recording, Les Control Ring and built-in Wi-Fi, NFC and Bluetooth connectivity .
Sony Cyber-shot DSC-HX99 Key Features:
- 18.2-megapixel 1/2.3' Exmor R CMOS sensor
- 30x (24-720mm) ZEISS Vario-Sonnar T* optical zoom lens
- 60x Clear Image Zoom
- BIONZ X Image Processor
- Optical SteadyShot
- 3-inch 921k-dot 180-degree tilt LCD Touchscreen
- 638k-dot Pop-up OLED viewfinder
- ISO up to 3200 (extended to ISO 6400)
- Built-in Wi-Fi, NFC & Bluetooth
- 4K(3840x2160/30fps) video recording
- High-frame rate HD video recording up to 100fps / 120fps
- 10fps Continuous shooting
- Eye AF
- P/A/S/M modes
- RAW shooting
- Control Ring
- Digital Level Gauge
Sony Cyber-shot DSC-HX99 PDF User Manual / Owner’s Manual / User Guide offers information and instructions how to operate the Cyber-shot DSC-HX99, include Quick Start Guide, Basic Operations, Advanced Guide, Menu Functions, Custom Settings, Troubleshooting & Specifications of Sony Cyber-shot DSC-HX99.
Free Download Sony Cyber-shot DSC-HX99 User Manual, User Guide, Owner's Manual, Operating Instructions in PDF file:
Sony Cyber-shot DSC-HX99 Startup Guide (PDF) - Basic User Manual, English
Sony Cyber-shot DSC-HX99 User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), English
Sony Cyber-shot DSC-HX99 Startup Guide (PDF) - Basic User Manual, Deutsch, Français, Español, Português, Italiano, Nederlands, Svenska, Suomi, Norsk, Dansk, Čeština, Slovenčina, Magyar, Polski
Sony Cyber-shot DSC-HX99 German User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Deutsch
Sony Cyber-shot DSC-HX99 French User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Français
Sony Cyber-shot DSC-HX99 Spanish User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Español
Sony Cyber-shot DSC-HX99 Portuguese User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Português
Sony Cyber-shot DSC-HX99 Italian User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Italiano
Sony Cyber-shot DSC-HX99 Dutch User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Nederlands
Sony Cyber-shot DSC-HX99 Swedish User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Svenska
Sony Cyber-shot DSC-HX99 Finnish User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Suomi
Sony Cyber-shot DSC-HX99 Norwegian User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Norsk
Sony Cyber-shot DSC-HX99 Danish User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Dansk
Sony Cyber-shot DSC-HX99 Russian User Guide (PDF) - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Русский
Sony Cyber-shot DSC-HX99 Czech User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Čeština
Sony Cyber-shot DSC-HX99 Slovak User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Slovenčina
Sony Cyber-shot DSC-HX99 Hungarian User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Magyar
Sony Cyber-shot DSC-HX99 Polish User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Polski
Sony Cyber-shot DSC-HX99 Ukrainian User Guide - Cyber-shot Help Guide (Advanced User Manual, In-depth Instructions), Online Content, Украї́нська
If you need Sony Cyber-shot DSC-HX99 PDF User Manual / Instruction Guide / Owner's Manual in other languages, please feel free to leave your comments at the bottom of this page.
Related Owner's Manual, User Guide, Instruction Manual:
UL Listed Commercial and Residential Installations
The installation requirements listed below must be met for the following
grades of service.
Grade AA Central Station and Police Connect (Standard or Encrypted Line
Security Service)
The installation must use T-Link module which communicates over LAN/WAN to
the Sur-Gard MLR-IP receiver or the TL200/250 which communicates over LAN/
WAN/Internet to the SG System III receiver. Polling time must be 90 seconds. Com-
promise detection time must be 6 minutes.
Grade A Local
•The installation must have a bell which is UL Listed for mercantile local alarms
(AMSECO MBL10B with model AB-12 bell housing).
•The digital communicator must be enabled.
•The control panel must be in the attack-resistant enclosure (DSC Model CMC-1
or PC4050CAR).
Grade B Central Station and Police Connect
•The installation must have a bell which is UL Listed for mercantile local alarms
(AMSECO MBL10B with model AB-12 bell housing).
•The digital communicator must be enabled.
•The control panel must be in the attack resistant enclosure (DSC Model CMC-1
or PC4050CAR).
Grade C Central Station
•The digital communicator must be enabled.
•The control panel must be in the attack resistant enclosure (DSC Model CMC-1
or PC4050CAR).
All Commercial Installations
•The Entry Delay must not exceed 120 seconds
•The Exit Delay must not exceed 120 seconds.
•The minimum Bell Time-out is 15 minutes.
Residential Fire & Burglary Installations
•The Entry Delay must not exceed 45 seconds
•The Exit Delay must not exceed 60 seconds.
•The minimum Bell Time-out is 4 minutes.
Home Health Care Signaling Equipment
•There must be at least two keypads, one of either the LCD5500Z/LCD5520Z or
LCD5501Z and one of the following models, PC5508Z, PC5516Z or PC5532Z.
Dsc Alarm User Manual
•Each system shall be programmed to activate an audible Trouble signal within 90
seconds upon loss of microprocessor memory.
•The minimum Bell Time-out is 5 minutes.
Programming
The notes in the programming sections describing the system configurations for
UL Listed installations must be implemented.
Control of the Protected Premises
In order to have a UL Certificated system the protected area is to be under the
responsibility of one ownership and management (i.e., one business under one
name). This may be a group of buildings attached or unattached with different
addresses but under the responsibility of someone having mutual interest. The
person of mutual interest is not the alarm-installing company.
Bell Location
The alarm sounding device (bell) must be located where it can be heard by the
person or persons responsible for maintaining the security system during the daily
arming cycle.
Protection of the Control Unit
The local control and the local power supply must be protected in one of the fol-
lowing ways:
•The control unit and audible alarm device must be in a protected area which is
armed 24 hours a day.
•Each partition must arm the area protecting the control unit and the audible
alarm device power supply. This may require duplicate protection armed by each
partition. Access to this protected area, without causing an alarm, will require
that all partitions be disarmed.
•In all cases described above, the protected area for the control unit must be pro-
grammed as not-bypassable.
Casual Users
The installer should caution the user(s) not to give system information to casual
users (e.g. codes, bypass methods, etc. to baby-sitters or service people). Only the
One-Time Use codes should be given to casual users.
User Information
The installer should advise the users and note in the User’s Manual:
•Service organization name and telephone number
•The programmed exit time
•The programmed entry time
•Test system weekly
Two-Wire Smoke Detector Compatibility (if available)
Maximum loop resistance: 24 Ohms
•Operating Voltage Range: 9.8 - 13.8 V
DC
•Maximum Alarm Current: 89 mA
•Compatibility Identifier: PC18-1
See Section 5PGM Wiring for compatible 2-wire smoke detectors.
SIA FAR Installations
Minimum requirement system for SIA-FAR Installations:
• 1 PC1616/PC1832/PC1864 Control panel
• 2 Local annunciation devices
The local annunciation devices may be any combination of the following keypads,
as long as there is at least one LCD keypad in the installation (Model LCD5500Z or
PK5500).
• LCD5500Z
• LCD5501Z
• PK5500
• PK5508
• PKP-LCD
• PKP-ICN
• PK5501
• PK5516
The following optional subassembly modules also bear the SIA FAR classification
and may be used if desired:
PC5108 Zone Expander Module
Compatible initiating devices: Bravo200 series, 300 series, 400 series, 500 series,
600 series, AC-100, Encore300 series, Force200 series, 210 series, MN240.
PC5208 Low Current PGM Output Module
The following optional accessory modules also bear the SIA FAR classification and
may be used if desired.
PC5204 Auxiliary Power Supply with PGM output ports
Escort5580/Escort5580TC, PC5400 Printer Module
Caution
• For SIA FAR installations, only use modules / devices that are listed on this page.
• Fire Alarm Verification feature (Auto Verified Fire zone) is not supported on 2-
wire smoke detectors zones. This feature may be enabled for 4-wire smoke
detectors only.
• Call Waiting Cancel (Section 382 Option 4) feature on a non-Call Waiting line
will prevent successful communication to the central station.
• All smoke detectors on the system must be tested annually by conducting the
Installer Walk Test prior to exiting the walk test mode, a sensor reset must be
conducted on the system, [
✱][7][2] to reset all latching 4-wire smoke detectors.
Please refer to the smoke detector installation instructions on how to correctly
test the detectors.
Notes
• Programming at installation may be subordinate to other UL requirements for
the intended application.
• Cross zones have the ability to individually protect the intended area (e.g.,
motion detectors, which overlap).
• Cross zoning is not recommended for line security Installations nor is it to be
implemented on exit / entry zones.
• There is a communication delay of 30 seconds in this control panel. It can be
removed, or it can be increased up to 45 seconds at the option of the end user
by consulting with the Installer.
• Do not duplicate any reporting codes. This applies for all communication for-
mats other than SIA sending automatic programmed reporting codes.
• The control unit must be installed with a local sounding device and an off-
premise transmission for SIA communication format.
• For ULC Listed Fire Monitoring Installations & module requirements, please refer
to the ULC Installation Information sheet, part# 29002157.
• Use a CSA/cUL transformer, hardwired.
• All tamper circuits may be connected to the same zone.
• Use ULC-LA for AC Power indication.
LISTING REQUIREMENTS