Novation Launchpad Mini Mk2 User Manual

Novation Launchpad MKII Pdf User Manuals. View online or download Novation Launchpad MKII Operation Manual. VIDEO: Using Launchpad Mini with Ableton Live on PC; Launchpad MKII Bundled Software; Getting Started with Launchpad: Installing the Launchpad Demo Packs for Ableton Live; Launchpad Pro Bundled Software; Novation Product User Manuals. The Launchpad Mk2 can transform a boring studio session into a journey of unique sounds, samples and songs at the push of the button. In this Novation Launchpad Mk2 review we are going to dive into the pros and cons of this midi pad controller and see if it is the right fit for your style and studio pleasure.

These scripts are modified version of Ableton Live 9.2 scripts for Novation Launchpad and provide the same functionality but add support for editing the midi clips using a step sequencer, an Instrument Controller and Device Controller and an improved Instrument Mode. It does not require any external tool like Max for Live (M4L) in order to work. This script is just a plain Live Control Surface Python Script.


Comment, feedback and updates : please check this thread on Ableton forum http://forum.ableton.com/viewtopic.php?f=1&t=168495

Willing to make a donation ? paypal to my account [email protected].

Installation

Supported Hardware and Software

Launchpad 95 supports Ableton Live 9.2 or greater and Live 10. For Live 8.4: Launchpad85.

Launchpad 95 supports:

  • Launchpad
  • Launchpad S
  • Launchpad Mini
  • Launchpad Mini MK2 (RGB)
  • Launchpad Mini MK3 (RGB)
  • Launchpad X (RGB)
  • Launchpad PRO see Launchpad Pro95

For Launchpad X and Launchpad Mini MK3, make sure to select 'MIDI' Ports and not the 'DAW' ports.

Setup

  • Download the installation archive : Launchpad95.zip
  • Unzip the zip file and copy the folder Launchpad95 into the Ableton Live's 'MIDI Remote Scripts' folder. (where is that folder ? look at faq 3.
  • After the folder has been copied, plug-in your Launchpad in the computer and start Ableton Live. Open up the preferences panel and go to 'MIDI Sync' panel. Select Launchpad95 as your control surface and select the launchpad Midi Port MIDI ports like so :
  • Make sure to enable 'Track', 'Sync' and 'Remote' in the midi options below for the MIDI ports used by Launchpad 95.

User Manual

Four modes are added on top of the existing modes. These are Drum Step Sequencer mode to edit midi clips, a medodic step sequencer, and Device Controller mode to edit any parameter of any instrument, effect or device on any track of your arrangement, and finally an Instrument Mode providing a tighter integration with Live.

Mini

Note the manual is also available in french as a PDF, thanks to François Lehérissier.

Instrument Controller Mode

Instrument Mode replaces classic User Mode 1. To activate Instrument Controller Mode, press User Mode 1 button (mode button remains amber). Press User Mode 1 button once again, button turns green, activating the Device Controller. Once more the button will turn red, activating the plain old User Mode 1 in case you need it.

The top up/down navigation buttons allow to navigate scenes, while the left/right button allow to navigate tracks. The scene buttons allow you to control the currently selected track and clip, arm, solo, record, play, stop etc (see below).

The matrix of buttons act as a midi keyboard proposing a drum rack layout, and a melodic mode. Melodic mode enable you to select root note, type of mode (major, minor etc), and the octave you play in.

Most of the scene buttons have alternate functions when you hold them long (0.5 sec) :
- undo : a long press will perform a redo !
- stop : a long press will DELETE currently selected clip. No worries this is undoable !
- solo : a long press on solo will enable/disable the selected track.
- arm : holding arm for more than 0.5 seconds will toggle live's metronome. A very long press (2 sec) will alternate between auto arm of track and manual track arming. Colour of the button will reflect the selected mode. This is really useful if you have more than one controller/person interacting with Live.

prev scenenext sceneprev tracknext trackSession modeuser 1 Inst.user 2 stepmixer mode
scale
undo. long press to redo
undo
octave up
octave down
stop
start selected clip
start
solo
session record
overdub

scale edition mode

To enter scale edition mode press (and keep pressed) the 1st scene button from Instrument mode.

prev scenenext sceneprev tracknext trackSession modeuser 1 Inst.user 2 stepmixer mode
absolute rootorient.chromatic guitardiatonic sequentdiatonic 3rddiatonic 4thchromaticdrumrackscale
C#D#relative scaleF#G#A#5th leftquick scale mode
undo. long press to redo
undo
CDEFGAB5th rightoctave up
-2-1012345octave down
MajorMinorDorianMixolyd.LydianPhrygianLocrianDiminish.stop
Whole-halfWhole ToneMinor BluesMinor Penta.Major Penta.Harmonic MinorMelodic MinorSuper Locrian
start selected clip
start
BhairavHunga. MinorMinor GypsyHirojoshiIn-SenIwatoKumoiPelogsolo
SpanishIonEol
session record
overdub
Orient
this button will change the orientation from vertical to horizontal of the instrument mode.
Absolute root
the bottom left left button will always be the root mode of the selected root note.
Chromatic Guitar
Scale Mode is pretty much like regular chromatic mode, except the top four rows are all shifted by one semitone. This is so that the bottom 6 rows emulate standard guitar tuning.
Diatonic sequent
each row represents an octave, so each first and last button of each row will be the root note.
Diatonic 3rd
when moving from one button to the next top, you will move a 3rd degree in the scale. 3rd is very practical to play chords vertically.
Diatonic 4th
when moving from one button to the next top, you will move a 4th degree in the scale. 4th is the default mode, also on the push.
Chromatic
each button to the left or right of a button will be a semitone lower or higher.
C, C#, D, D#, E, F, F#, G, G#, A, A#, B
selects the root note of the scale.
Relative scale
changes current selected scale to its relative scale. IE. from C major to C minor and viceversa.
5th left
changes current selected scale to the prior scale in the circle of fifths (a 5th lower).
5th right
changes current selected scale to the next scale in the circle of fifths (a 5th higher).
Quick scale mode
substitutes the top 2 rows of instrument mode for the quick scale modes (see below).
-2, -1, 0, 1, 2, 3, 4, 5
changes the octave of the instrument mode.

quick scale modes

if quick scale is activated (last button on the right on the 2nd row in scale edit mode), the two first rows of the launchpad allow you to quickly change the scale.

this shows the two first rows of the launchpad. the last button of the first row changes between root note selection and mode selection.

root note

in this mode you can select the root note of your scale. you can also quickly alternate between minor and major by pressing the button again

C#D#relative scaleF#G#A#5th leftscale / mode togglescale
CDEFGAB5th right
undo. long press to redo
undo
quick scale modes: modus

in this mode you can select the mode of your scale.

Rexing dash cam x80 user manual. 2015 REXING All Rights Res erv d. About this manual This device provides high-quality digital recording using Rexing’s high standards of design, construction and technological expertise. This user manual describes the device’s functions and features in detail. Please read this manual before using the device to ensure safe and proper use. Get support and information on Rexing dash cams. Find the latest manual, software, videos, specifications, FAQ, and more.

MajorMinorDorianMixolyd.LydianPhrygianLocrianscale / mode togglescale
Diminish.Minor BluesHarmonic MinorMelodic MinorSuper LocrianHunga. MinorMinor GypsySpanish
undo. long press to redo
undo
note repeat

in this mode you can activate and configure note repeat.

Swing +2.5% Swing -2.5%Swing 0%Swing 25%Swing 50%Swing 75%Repeat On/OffScale / mode togglescale
1/41/4T1/81/8T1/161/16T1/321/32T
undo. long press to redo
undo

Drum Step Sequencer Mode

To activate the Drum Step Sequencer, select a midi clip in the clip view. Then press User Mode 2 button once, activating the step sequencer (in normal mode). Press user mode 2 button once more opens the Melodic step sequencer

this sequencer has two sub modes detailed below. combined and multinotes. (note there is a second step sequencer, melodic step sequencer detailed further down).

A playback/metronome indicator is scrolling thru the grid in amber to indicate the playing position of the clip as the clip is playing. This is just an overlay, it does not affect the functionality of the buttons.

Here are the colour codes used :
- Normal notes are shown in Green, intensity depending on their velocity.
- Muted notes are displayed in red.
- Notes being currently played are flashing in red.
- Notes being played and being outside of the currently displaying midi clip block will also flash in red.

Some other information is displayed, using orange colour :
- Note markers help to better visualise what row correspond to which note:
- root note of the selected are marked with three orange left buttons lit up.
- other notes of the scale are marked with one orange button lit on the left-most row.
- while scrolling left and right along the clip, a vertical bar will display you where you are in the clip

A summary of functions assigned to the buttons is shown in the table below. hover your mouse above a button to get detailed descriptions.

StepSeq by default works in combined mode. pressing the 4th scene button toggles between combined mode and multi note mode. Multinote mode works in similarly to the the previous step in launchpad85, while combined mode offers mode close to the way Push StepSeq behaves.

Combined Mode

The bottom left area let you select the note currently being edited on the top note editor.

The bottom right area allows you the select the currently clip part currently being displayed (single button press) and edited (double press or one button after the other).

Some buttons have combined function :

  • Lock (2nd scene button):
    • press long to switch between clip lock and play clip on locked track mode
    • yellow : track lock mode. step sequencer is locked to current track and will follow playing clip on this track
    • red : step sequencer is locked to current clip.
  • quantize (3rd scene button):
    • press long duplicate clip in a new clip
  • Mute (last scene button):
    • hold mute button and click on a note to mute it
    • hold mute button and press on a note in the bottom left quadrant to mute it
    • hold mute button and select a loop range in the loop selector to delete it
  • velocity (7th scene button):
    • hold velocity button and click on a note to change its velocity
    • hold velocity button and click on a note to change in the note selector to ear a preview of the sound
    • hold velocity button and select a loop range in the loop selector to extend the original clip content to the newly selected length
  • velocity (7th scene button) and mute
    • hold velocity button and mute button at the same time and select a loop range in the loop selector in order to mute this time selection

prev scenenext sceneprev tracknext trackSession modeuser 1 deviceuser 2 stepmixer mode
Display Scale Selection Overlay
scale
lock step seq to current clip (very useful !). long press to lock on current track only
lock
quant.
switches between combined and multinote modes
modes
up
scroll down (notes)
down
velocity
hold and press a note in the matrix to (un)mute it.
hold and press a note in the note selector to mute a lane
hold+nav keys to scroll up/down one octave
mute

Multinote Mode

To activate this mode, press the 4th scene button while in Combined Mode (pressing the same button again will take you back to Combined Mode).

This mode uses the grid as a 8*8 matrix. one midi note per row. It follows the scale mode selected. Note that the left and right arrows are used to navigate left and right in the clip.


prev scene
select next scene
next scene
prev
page
select next clip page
next
page
Session modeuser 1 deviceuser 2 stepmixer mode
Display Scale Selection Overlay
scale
lock
cycle thru available quantisations
quant.
modes
scroll up (notes)
up
down
cycle thru velocities and velocity shift notes
velocity
hold and press a note in the matrix to (un)mute it.
hold and press a note in the note selector to mute a lane
hold+nav keys to scroll up/down one octave
mute

Melodic StepSequencer

To activate this mode, press user mode 2 button until it turns green.

This mode behave more how a hardware stepsequencer works. it uses the grid as a 7*8 matrix to edit note pitch, velocity, length and octave. one function per page. of course notes pitches follow the selected scale !

The last row of the matrix acts as a page selector and work in the similar fashion to the combined step stequencer loop selector.

double press on the last scene button toggles between monophonic and polyphonic modes.


prev scene
select next scene
next scene
prev tracknext trackSession modeuser 1 deviceuser 2 stepmixer mode
Display Scale Selection Overlay
scale
lock
cycle thru available quantisations
quant.
randomise the selected function (pitch,length,velocity,octave)
random !
length
octave
velocity
notes

Device Controller Mode

Navigation

Navigation among tracks and devices is done using the top left navigation buttons.

Editing parameters

You can edit eight parameters of the selected device on the selected track at once. One parameter per column. You can navigate banks of parameters using scene buttons 2 and 3. depending on the type of parameter edited launchpad will display then in different ways.

On/Off parameters
using the color code red. only one button will be used to change the parameter
Parameter with list of values
for the parameters that have a list of values, the colour code it amber, for example a Synth wave form selector (square, sine, triangle). If the parameter has less that 8 values, they will be directly acessible one by one. if more values are available, you can scroll thru the values. the closer the button to the center the more precise. the closer the top or bottom of the launchpad, the greater the value change will be at each press.
Parameter continuous values
for the parameters that have a continuous value, like Volume, Panning, etc, the colour code is green. by default Launchpad displays the parameter like a volume slider on the mixer mode. if you activate the precision slider mode (by pressing scene 4 button), the sliders will then work in the similar way to the case of parameter with list of values.

Locking to devices

You can save up to 4 devices using the 4 bottom scene button. if not device is saved, the button will be pink. To save a device, first select the desired device, then press one of the 4 last scene buttons for more than half a second. the button turn red ! your device is saved. You can recall it at any time by a short press on the scene button. To unsave a device, apply a long press again on the button.

According to some reports, there have been some issues with the camera displaying a “lens cap off” error when the lens cap is already off. Marketed towards casual photographers, the camera can also shoot video in 720p HD resolution, and has a variety of different modes and settings that are used to take pictures. The Life series Nikon has created is geared towards people who are not looking to do intensive photography. Nikon coolpix l810 digital camera user manual.


Device+Device-Track-Track+Session modeuser 1 deviceuser 2 stepmixer mode
On/Off
Bank+
Bank-
Precision
Lock1
Lock2
Lock3
Lock4

Session Mode

scenes upscenes downtracks lefttracks rightSession modeuser 1 Inst.user 2 stepmixer mode
scene
scene
scene
scene
scene
scene
scene
scene

User1 Mode

Session modeuser 1 Inst.user 2 stepmixer mode

User2 Mode

Session modeuser 1 Inst.user 2 stepmixer mode

Mixer Mode

prev scenenext sceneprev tracknext trackSession modeuser 1 Inst.user 2 stepmixer mode
Volume
Pan
Send A
Send B
Stop All
Active all
Unsolo ll
Unarm All

Source

F.A.Q.

1. Which Launchpad flavours are supported
Launchpad, Launchpad S, Mini, Mini MK2 and MK2 (RGB), Mini MK3, and Launchpad X are supported
Basically all Launchpad but the pro are supported by this script.
Launchpad Pro is supported by Launchpad Pro95
2. Which Ableton live versions are supported
Launchpad 95 works with Live 9.2+, and Live10 32 bit or 64 bit, Mac or Windows, suite or intro or standard. Basically with every combination you may think of as long at it is live 9.2 or greater.
Of course Ableton from time to time change their Python Live without notification and therefore Launchpad95 might stop working, but i am trying to keep up and the changes.
if Launchpad95 stopped worked after an update, make sure to download the last version from this site.
3. Where should I put the script ?
On pc/windows 7 : inside 'C:ProgramDataAbletonLive 9 SuiteResourcesMIDI Remote Scripts'
On a mac right-click the Live application you use (there might more than one installed!) and select 'view package content', then browse to 'App-Resources/MIDI Remote Scripts'.
Inside this 'MIDI Remote Scripts' folder, you should have a folder called 'Launchpad95'. inside this folder you should have a bunch of .py files, and a for each of them a .pyc file. (.pyc files are compiled version of the .py that live compiles as you start it.)
Sometimes a picture is worth 1000 words. Take a look at these screenshots.
- On a mac it look like this.
- on a pc like that
4. It does not work, I installed everything, but the launchpad does not light up when I select Launchpad95 in the dropdown in the preferences. what is wrong ?
It is hard to guess what you did wrong. You must have installed not the right way somehow. Try to install it from scratch again, download from this site, extract install, restart live. Among the list of things you can try to do :
  • - check the you installed at the right place. (check question #3 !)
  • - Pay attention to the folder name AND its full path. (again see screenshots in above in question #3)
  • - how many versions of live do you have installed ?
  • - are you running live 9.2 or greater ? for live 8 please use launchpad85. For live 9.0, upgrade to live 9.2+.

5. It does not work, I installed everything, but Launchpad95 does not appears the dropdown in the preferences. what is wrong ?
See question 4.
6. Note Feedback is not working in Instrument Controller
Make sure you activated the launchapd midi in/out as 'track' in Live midi preferences.
7. good work ! I wish to donate ! is there a way to donate somehow ?
Sure ! Your donations allowed me to pay for the Launchpad Pro that is now supported ! thank you for this.
paypal to my account [email protected].

Known Issues

  • in live 9, moving notes in clip editor while stepseq is open duplicates notes.
  • Launchpad85 for live 8 is now longer maintained/improved.

History

  • 2019-11-02 - support for Launchpad Mini MK3 and Launchpad X
  • 2019-08-26 - documentation fixes. duplicate clip now does not fire it.
  • 2017-04-01 - note repeater ! (sub mode of quick scale mode) contribution from Pablo Torres.
  • 2016-04-09 - small fixes for mk2. skin improvements
  • 2016-03-28 - Launchpad MK2 RGB autodetect. better skinning. merging device mode from launchpad pro95
  • 2016-03-02 - Launchpad MK2 RGB support.
  • 2015-12-31 - code cleanup, partial and untested support for MK2 RGB, skinning
  • 2015-04-03
    - save scale in clip in stepseq and instrument mode (off by default, check Settings.py)
    - customisable user modes (in Settings.py)
    - clean up TrackController
  • 2015-02-24 - minor fix for live 9.2 beta 1
  • 2015-02-13 - minor fixes
  • 2015-01-20 - change: Option to add clip stop buttons moved to Settings.py
  • 2015-01-14 - add: added option to add stop buttons at bottom of session (MainSelectorComponent.py:39)
  • 2015-01-14 - fix: minor cleanup and bugfixes !
  • 2014-12-06 - fix: minor cleanup and bugfixes !
  • 2014-10-03 - change: revamped device controller !
  • 2014-09-16 - change: minor fixes in melodic stepseq.
  • 2014-07-14 - change: double pressing mute button in stepseq holds shift.
  • 2014-06-11 - fix: compatibility fix for live 9.1.3b8. should be backward compatible with 9.1.2 fix : minor fixes
  • 2014-04-30 - add: m4l OSD/helper. fix : minor fixes in step seq. fix : uniformise scale edition and quick scale
  • 2014-03-28 - fix: bugs while in drumrack mode. fix session scene not working while exiting user mode 1. add: relative scale to quick scales, added circle of fifth navigation
  • 2014-03-12 - fix: compatibility with max4live in user mode 2. fix midi channels for some modes. add: duplicate clip in step seq (hold lock button for 0.5sec).
  • 2014-02-27 - major update !
    - new melodic step seq !
    - preview of notes in combined step seq (hold 7th scene button and play on the note selector in the lower left corner of the matrix)
    - quick scale in instrument mode to quickly change scale while playing
    - compatibility with live 9.1.1 and 9.1.2 or above.
    - various bugs fixes and improvements.
  • 2014-01-06 - add: diatonic 3rd and sequent and guitar chromatic modes. fix: implicit arm. change: updated documentation
  • 2014-01-06 - fix: track locking in step seq
  • 2013-12-16 - fix: led feedback in instrument mode !
  • 2013-12-11 - add: improve integration with launchpad95Colour.
  • 2013-12-07 - change: change scale colour. minor bugfix.
  • 2013-11-18 - fix: improve stepseq lock to a track mode.
  • 2013-11-18 - add: long press on the stepseq lock button to lock to a track.
  • 2013-11-11 - add: combos to mute, delete and extend clip content in step sequencer
  • 2013-10-28 - fix: small bug fixes
  • 2013-10-23 - add: add option to compress channels used by launchpad95 to free up channels for other devices
  • 2013-10-18 - fix: show device panel while activating device controller. fix led blinking when entering stepseq. properly turn off scene buttons in user modes. add: use clip color palette to blink white clips
  • 2013-10-09 - fix: Fix Clip linking in StepSeq. small fixes.
  • 2013-09-27 - fix: matrix not fully updated while entering multinote stepseq.
  • 2013-09-22 - fix: compatibility with live 9.1 beta. Fix Clip linking in StepSeq.
  • 2013-09-02 - fix: fix a few bugs in metronome and clip callback in stepseq
  • 2013-08-13 - add: complete rework of the stepseq
  • 2013-05-28 - fix note highlighting in StepSeq in hires. various minor fixes in stepseq. Fix UserMode2 (was sending midi notes)
  • 2013-05-25 - fix paging StepSeq, add support for selected DrumPad at the highest resolution. fix note feedback when entering instrument mode. add: very long press Arm in instrument mode to toggle implicit track arm
  • 2013-05-09 - fix for live 9.0.4: replace overdub by session_record in TrackController. overdub in Python API started to behave strange from 9.0.4.
  • 2013-05-04 - add: long press on solo to mute/unmute track in instrument mode. fix: disable implicit arm while leaving instrument mode.
  • 2013-04-13 - change : changed some buttons in instrument mode. support for implicit arm.
  • 2013-04-13 - add : support for Instrument mode
  • 2013-03-13 - fix : fix loop length dec button
  • 2013-03-05 - add : Launchpad95 to support Live 9
  • 2012-10-21 - change : while extending midi clip, clone existing notes in the newly created portion
  • 2012-02-02 - change : fixed midi channels for step sequencer and device controller to avoid conflicts
  • 2012-01-22 - add: up/down per octave paging in step sequencer (press and hold mute and press navigation keys) fix:scrolling boundaries
  • 2012-01-21 - add: Scale mode. fix: better scrolling in fold and scale mode. change: merged mute shift and mute. changed: merge velocity and velocity shift.
  • 2012-01-03 - add: easier to configure metronome and note markers in step sequencer. add: adapted LaunchpadColour (Launchpad85Colour) to this script, for color blind people
  • 2012-01-02 - bug fix: improve button response time in step sequencer (was causing problem while pressing multiple buttons at once)
  • 2011-12-31 - bug fix: loops longer than 8 blocks were not supported. add : scale marked in step sequencer marking C (3 amber blocks) and A (one amber block)
  • 2011-12-29 - bug fix: some buttons not responding correctly in user mode 1
  • 2011-12-26 - Improved live integration (shows Device chain/clip editor). fixed crash while loading Live Set
  • 2011-12-23 - support for MaxForLive. addition of lock mode in step sequencer. bug fixes. renamed from Launchpad75 to Launchpad85.
  • 2011-10-05 - addition mute lane in step sequencer
  • 2011-10-01 - addition of device controller
  • 2011-08-20 - bug fixes
  • 2011-07-22 - first public version
  • 2011-05 - working on an initial version

Contact

feel free to contact me for any suggestions and bug reports.

_

Made to perform

Launchpad X is our essential 64-pad MIDI grid controller for Ableton Live. It gives you everything you need to make music. Launch, play and perform your sounds and build your tracks using the large, super-sensitive RGB pads, dynamic note and scale modes, and mixer controls.

The essential Live controller

Everything about making tracks in Ableton Live is made easier with Launchpad X’s quick, hands-on clip and scene launching and our most playable grid to date. Play your instruments and devices expressively with the 64 velocity- and pressure-sensitive RGB pads, then never lose an idea with one-press Capture MIDI control. Launchpad X belongs on the desk of every Ableton Live music maker.

Express yourself

Launchpad X gives you everything you need right at your fingertips so you can spend less time clicking a mouse and more time making music. Never worry about being out of key – Dynamic Note and Scale modes let you easily play perfectly in-key basslines, melodies, chords and leads. Our most responsive velocity-sensitive pads with polyphonic aftertouch let you play your instruments dynamically and expressively. Step back from the screen, get hands-on and dive into your tracks.

Make it yours

Go deeper and get Launchpad X working the way you want. Use Novation Components to customise MIDI mappings, and control almost anything; four custom modes mean you can design how this essential grid controller works for you – you’re only limited by your imagination.

Take control of your performance

Essential performance controls are a single button-press away: stop, solo, mute, record arm and set your levels, pans and sends. Using Launchpad X is a simple as it gets, no drivers to install, just plug and perform.

Sound Collective

When you register your Launchpad X, you’ll automatically gain access to Sound Collective. Get new free plug-ins every couple of months from some of the biggest names in the business, along with offers, discounts and more.

Splice Sounds

Get two months free access to Splice Sounds with Launchpad X, offering millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily. Take 100 credits per month for sounds, foley, presets, and MIDI files and join millions of artists using Splice to make all kinds of music, Grammy-winning albums, and cinematic scores.

64 RGB Pads

Large RGB velocity- and pressure-sensitive pads give you a perfect reflection of your Ableton Live session, making it easier than ever to see your clips and play your instruments expressively.

Novation Launchpad Mini Mk2

Ableton Live Integration

Quickly launch clips and scenes, never lose ideas with Capture MIDI, and access performance controls like stop, solo, mute, record arm, volume, pan, and sends to dynamically control your music, no mouse needed.

Novation Launchpad Mk2 Driver

Dynamic Note and Scale modes

Enable you to effortlessly play perfectly in-key basslines, melodies, chords and leads. Launchpad X even knows when you’re drumming and shows your drum rack on the grid.

Four Custom Modes

Use Novation Components to customise mappings and control anything MIDI easily from Launchpad X.

Get Started Easily

Use our online Easy Start tool to get all the software you want, and step-by-step video guides to get you set up with Live and making music in minutes.

Product Hardware Specifications

  • 64 Velocity Sensitive Pads
  • 16 Buttons
  • 81 RGB LEDs
  • USB-C Socket
  • Kensington MiniSaver Slot

Included Software

  • Ableton Live Lite – quickly organise and arrange your sounds and start making tracks with this staple electronic-music-making software.
  • Two months Splice Sounds membership – offering millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily.
  • AAS Session Bundle – Three synths for music makers, providing staple sounds for your tracks.
  • XLN Addictive Keys – Access one of four virtual keyboards when you register your first piece of Novation hardware.
  • Klevgrand R0Verb and DAW Cassette – High quality reverb and tape deck emulation plug-ins, to add some space or take your sound back to the golden age of cassette tapes.
  • Softube Time and Tone bundle – made up of four of Softube's world class plug-ins: reverb, delay, an easy to use mastering tool and distortion.
  • Sound Collective – bringing Novation hardware owners a new free plug-in every few months.

Software Compatibility

  • Ableton Live 10 Lite is included

If you already have Ableton Live it must be version 10 or greater to work with Launchpad. We recommend that you update to the latest version as previous versions of Ableton Live do not include the Launchpad integration for InControl. Launchpad will also work as a standard MIDI controller.

Power Requirements

Product dimensions