Casio Pathfinder Tough Solar User Manual

Aug 01, 2012  Casio Protrek Triple Sensor Tough Solar PRG250T / PRW2500T. & comparison with Pathfinder - Perth WAtch #32 - Duration: 16:46. Perth WAtch 55,971 views. CASIO PRO TREK TOUGH SOLAR TRIPLE.

Watch Archive. Casio. User Manuals. This reference library contains over 1,500 Casio watch manuals. You need to look up the module number of your watch to find the right one. It should be engraved on the case back. Find that number in the list below to view the owner's guide and instructions for that watch. Expose the Casio solar to bright light or the sun to charge the batteries before setting the time. Ensure the batteries hold a charge strong enough to set the time. Acquaint yourself with the timekeeping mode of the watch. Note the four function buttons located at 2, 4, 8 and 10 o’clock at the edge of the case. FAQs & Downloads. Product Repair / Parts. CASIO Sales Distributors. Print this page.

Advertising

1

Operation Guide 3173 3246

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measured values are then shown on the display. Such features make this watch useful when hiking,
mountain climbing, or when engaging in other such outdoor activities.

Warning !

The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.

/pacman-rom-download-for-android.html.

When engaging in mountain climbing or other activities in which losing your way can create a

Casio Pathfinder Tough Solar Manual

dangerous or life-threatening situation, always use a second compass to confi rm direction
readings.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

About This Manual

The operational procedures for Modules 3173 and 3246 are identical. All of the illustrations in this

manual show Module 3173.

Casio

Depending on the model of your watch, display text appears either as dark fi gures on a light

background, or light fi gures on a dark background. All sample displays in this manual are shown using
dark fi gures on a light background.

Button operations are indicated using the letters shown in the illustration.

Note that the product illustrations in this manual are intended for reference only, and so the actual

product may appear somewhat different than depicted by an illustration.

Things to check before using the watch

1. Check the battery power level.

Is “H” or “M” displayed for the battery power indicator?

Go to step 2.

Power is low. Charge the watch by placing it in a location
where it is exposed to light. For details, see “Charging the
Watch” .

NO

YES

YES

Does any one of the following conditions exist?

Battery power indicator shows “L” and “LOW” is displayed in the

upper left corner of the screen.

C” is displayed in the lower left corner of the screen.

The face is blank.

The watch is charged
sufficiently.
For details about
charging, see
“Charging the Watch” .

NEXT

Battery power
indicator

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To confi gure Home City settings” to confi gure your Home City and daylight
saving time settings.

Important!
World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you confi gure these settings correctly.

3. Set the current time.

See “Confi guring Current Time and Date Settings”.

The watch is now ready for use.

Charging the Watch

The face of the watch is a solar cell that generates power from light. The generated power charges a
built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed
to light.

Charging Guide

Whenever you are not wearing the
watch, leave it in a location where it
is exposed to light.

Best charging performance is

achieved by exposing the watch to
the strongest light available.

When wearing the watch, make sure
that its face is not blocked from light
by the sleeve of your clothing.

The watch may enter a sleep state

if its face is blocked by your sleeve
even only partially.

Warning!
Leaving the watch in bright light for charging can cause it to become quite hot.
Take care when handling the watch to avoid burn injury. The watch can become particularly hot
when exposed to the following conditions for long periods.

On the dashboard of a car parked in direct sunlight

Too close to an incandescent lamp

Under direct sunlight

Important!

Download for android 6.0. Sep 24, 2015  Android 6.0, aka Marshmallow, seeks to give users great control over what apps are doing behind the scenes and to do a better job of managing device power consumption. For Android 6.0/6.0.1 custom ROMs, you will need to use Android 6.0 Marshmallow compatible Gapps. Without this, you will not have Play Store on the phone. Make sure you install Gapps so you have Play Store. These Marshmallow Gapps are 100% compatible with any Android smartphone, tablet, or any.

Allowing the watch to become very hot can cause its liquid crystal display to black out. The

appearance of the LCD should become normal again when the watch returns to a lower temperature.

Turn on the watch’s Power Saving function and keep it in an area normally exposed to bright light when

storing it for long periods. This helps to ensure that power does not run down.

Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is

blocked from exposure to light can cause power to run down. Expose the watch to bright light
whenever possible.

(Light)

(Light)

(Light)

Module 3173

(Light)

Module 3246

(Light)

(Light)

(Light)

Module 3173

(Light)

Module 3246

Power Levels

You can get an idea of the watch’s power level by observing the battery power indicator on the display.

Level Battery Power Indicator

Function Status

1

(H)

All functions enabled.

2

(M)

All functions enabled.

Casio Pathfinder Solar Watch

3

(L)

l

l l l l

Casio Watches Tough Solar Manual

l

l

l

l

l

l

l

l

l

l

l

l l

Illumination, beeper, and sensor operation
disabled.

4

(C)

Except for timekeeping and the C (charge)
indicator, all functions and display
indicators disabled.

5

All functions disabled.

The fl ashing LOW indicator at Level 3 (L) tells you that battery power is very low, and that exposure to

bright light for charging is required as soon as possible.

At Level 5, all functions are disabled and settings return to their initial factory defaults. Once the battery

reaches Level 2 (M) after falling to Level 5, reconfi gure the current time, date, and other settings.

Display indicators reappear as soon as the battery is charged from Level 5 to Level 2 (M).

Leaving the watch exposed to direct sunlight or some other very strong light source can cause the

battery power indicator to show a reading temporarily that is higher than the actual battery level. The
correct battery level should be indicated after a few minutes.

All data stored in memory is deleted, and the current time and all other settings return to their initial

factory defaults whenever battery power drops to Level 5 and when you have the battery replaced.

Power Recovery Mode

Performing multiple sensor, illumination, or beeper operations during a short period may cause all of

the battery power indicators (H, M, and L) to start fl ashing on the display. This indicates that the watch
is in the power recovery mode. Illumination, alarm, countdown timer alarm, hourly time signal, and
sensor operations will be disabled until battery power recovers.

Battery power will recover in about 15 minutes. At this time, the battery power indicators (H, M, L) will

stop fl ashing. This indicates that the functions listed above are enabled again.

If all of the battery power indicators (H, M, L) are fl ashing and the C (charge) indicator also is fl ashing,

it means the battery level is very low. Expose the watch to bright light as soon as possible.

Even if battery power is at Level 1 (H) or Level 2 (M), the Digital Compass Mode, Barometer/

Thermometer Mode, or Altimeter Mode sensor may be disabled if there is not enough voltage available
to power it suffi ciently. This is indicated when all of the battery power indicators (H, M, L) are fl ashing.

Frequent fl ashing of all of the battery power indicators (H, M, L) probably means that remaining battery

power is low. Leave the watch in bright light to allow it to charge.

Charging Times

Exposure Level (Brightness)

Daily

Operation

*1

Level Change *2

Level 5

Level 4

Level 3

Level 2

Level 1

Outdoor sunlight (50,000 lux)

5 min.

2 hours

12 hours

4 hours

Sunlight through a window (10,000 lux)

24 min.

5 hours

59 hours

16 hours

Casio pathfinder solar watch

Daylight through a window on a
cloudy day (5,000 lux)

48 min.

9 hours

120 hours

32 hours

Indoor fl uorescent lighting (500 lux)

8 hours

95 hours

– – –

– – –

*1 Approximate amount of exposure time required each day to generate enough power for normal daily

operation.

*2 Approximate amount of exposure time (in hours) required to take power from one level to the next.

The above exposure times all are for reference only. Actual exposure times depend on lighting

conditions.

For details about the operating time and daily operating conditions, see the “Power Supply” section of

the Specifi cations.

Power Saving

When turned on, Power Saving enters a sleep state automatically whenever the watch is left for a certain
period in an area where it is dark. The table below shows how watch functions are affected by Power
Saving.

There actually are two sleep state levels: “display sleep” and “function sleep”.

Elapsed Time in Dark

Display

Operation

60 to 70 minutes (display sleep)

Casio Pathfinder Manual

Blank, with PS fl ashing

Display is off, but all functions are enabled.

6 or 7 days (function sleep)

Blank, with PS not fl ashing

All functions are disabled, but timekeeping is
maintained.

The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is already in a sleep

state when 6:00 AM arrives, however, it will remain in the sleep state.

The watch will not enter a sleep state while it is in the Stopwatch Mode or Countdown Timer Mode.

To recover from the sleep state
Move the watch to a well-lit area, press any button, or angle the watch towards your face for reading.

To turn Power Saving on and off

1. In the Timekeeping Mode, hold down

E until the currently selected

city code starts to fl ash. This is the city code setting screen.

Before the city code starts to fl ash, the message SET Hold

will appear on the display. Keep

E depressed until SET Hold

disappears and the city code starts to fl ash.

2. Use

D to display the Power Saving On/Off screen shown nearby.

3. Press

A to toggle Power Saving on (On) and off (OFF).

4. Press

E twice to exit the setting screen.

Casio Pathfinder Tough Solar Watch

The Power Saving on indicator (PS) is on the display in all modes

Casio Pathfinder Tough Solar Watch Manual

while Power Saving is turned on.

Casio Tough Solar Manual

Battery power
indicator

Battery power
indicator

Power saving
on indicator

Power saving
on indicator

MO1007-EB

Advertising
This manual is related to the following products:
Table of contents
Popular Brands
Popular manuals
Casio Updated: 2007-08-22

Silver Pathfinder Solar Triple Sensor featuring Tough Solar, Digital Compass, Altimeter, Barometer, Thermometer and many other great tools to keep you moving. Titanium Band.

Technical Specs

* Tough Solar Power
* Digital Compass
16 points of measurement
Measuring range: 0 to 359 degrees
Measuring unit: 1 degree
* Altimeter
Measuring range: -700 to 10,000m (-2,300 to 32,800ft)
Measuring unit: 5m (20ft)
Auto memory measurements
* Altimeter Memory
Memory capacity: 41 records
Measurement data: altitude, month, date, time
Reference altitude setting
* Altitude indicator
* Barometer
Display range: 260 to 1,100 hPa (7.65 to 32.45 inHg)
Display unit: 1 hPa (0.05 inHg)
Atmospheric pressure tendency graph
* Thermometer
Display range: -10 to 60 C (14 to 140 F)
Display unit: 0.1 C (0.2 F)
* 50M Water Resistant
* Low Temperature Resistant (-10 C / 14 F)
* Full Auto EL Backlight with Afterglow
* Duplex LCD
* 5 Daily Alarms
* Countdown Timer
Measuring unit: 1 second
Countdown range: 1 minute to 60 minutes
Auto-repeat function
* 1/100 second stopwatch
Measuring capacity: 9:59'59.99'
Measuring modes: Elapsed time, split time, 1st-2nd place times
* Hourly Time Signal
* Auto Calendar (pre-programmed until the year 2039)
* 12/24 Hour Formats
* Accuracy: ±15 seconds per month
* Storage Battery CTL1616
* Battery Power Indicator
* Power Saving Function
* Approx. battery life: 6 months on full charge (without further exposure to light)
* Module 2872

Size of case/total weight
PAG70 56.0 x 48.2 x 13.9mm / 65g
PAG70T 56.0 x 48.2 x 13.9mm / 113g

Download Now
PAG70T-7V Manual
Related Manuals
Casio PAG60-1AV Pathfinder Watches
Casio PAG80-1V Pathfinder Watches
Casio PAG50T-7V Pathfinder Watches
Casio PAG80L-3V Pathfinder Watches
Casio PAG50-1V Pathfinder Watches
Casio PAG80T-7V Pathfinder Watches
Casio PAW1100T-7V Pathfinder Watches
Casio PAG40B-2V Pathfinder Watches
Casio PAW1200-1V/3V Pathfinder Watches
Casio PAG40-3V Pathfinder Watches
Casio MTG930DA-8V G-Shock Watches
Casio PAW1200T-7V Pathfinder Watches