All Test Pro 5 User Manual
ALL-TEST PRO ® 31 User Manual ©2011, ALL-TEST Pro, LLC rev 2011-11F 8 Display Section The display section is divided into 2 sections: 1. Indicator Lights 2. Display Screen The Indicator Lights (section 1) informs the operator when an operation or test is being performed. The Display screen (section 2) allows the operator to select tests to be performed by the AT31.
ALL-TEST Pro, LLC
P.O Box 1139
Old Saybrook, CT 06475
Tel
860-399-4222
Fax
860-399-3180
Email [email protected]
Web www.alltestpro.com
Represented by:
Each ALL-TEST IV PRO includes:
Case, Charger, Test Leads,
PC Interface Cable, and TREND
™
software.
Optional Accessories
All Test Pro 7
• ATF11 Armature Text Fixture: for bar-to-bar testing of DC motor armatures in disassembled motors.
• M2000 Training Motor: A 1/3 HP 3-phase motor with known switch-selectable faults.
• EMCAT PRO Software: Comprehensive software for diagnostics and trending of AC motors, DC
Motors, single phase motors, and transformers.
ATPRO-115E or - 230E The ALL-TEST PRO
®
Professional System
Our most comprehensive package for off-line diagnostics and predictive maintenance. It
combines the basic troubleshooting and real-time rotor test of the ALL-TEST PRO
®
31,
the analytical and trending power of the ALL-TEST IV PRO
™
, and the motor management
capabilities of the EMCAT PRO
™
software. EMCAT PRO
™
software supports AC and DC
motors of all types, as well as coils, transformers, and even single phase motors. Used
together, these tools deliver unparalleled capability to both new and established predictive,
preventive and reliability based maintenance programs.
Includes: ALL-TEST IV PRO
™
analyzer, ALL-TEST PRO
®
31, manuals and guidebooks,
leads, chargers, cases, EMCAT PRO
™
software (requires Windows XP or greater), Condition
Calculator
™
software, an ATF-11 armature test fixture and an M2000 training motor.
ATPOL II – ALL-TEST PRO
®
OL II (On-line testing) adds the power of Electrical Signature
Analysis and Power Analysis to the Professional System (see above).
© ALL-TEST Pro, LLC 2010. All rights reserved.
Specifications:
Resistance:
1 to 999 Ω
1
Impedance:
1 to 999 Ω
2
Inductance:
1 to 9999mH
3
Phase Angle:
9-90 degrees (whole number)
Current/Frequency Response (I/F):
0-99% (whole number)
Capacitance:
0.2 μF to 200 μF
Insulation Resistance:
0.1 to >99 MΩ, 500 and 1000V test voltages
Measurement Repeatability:
+-1% for all parameters except as noted below
Phase Angle- +-1 degree
Current/Frequency Response (I/F) +-1 digit
Capacitance- +-5%
Insulation Resistance- +-5%
Test Frequency:
100, 200, 400, 800 Hz
Display:
3-line alphanumeric LCD with backlight
Size:
4.8 x 9.92 x 2” (122 x 252 x 50 mm)
Weight:
1.7 lb/0.75 kg
Power:
Internal NiMH rechargeable battery pack
1
Auto & Manual mode displays from 0.001 to 999
2
Manual mode displays from 0.001 to 999
3
Manual mode displays from 0.001 to 9999mH
AT122010
User manual for saeco majic comfort coffee machine. Specifications subject to change without notification.
Features
Easy To Use
An automatic test mode is used for most tests. On screen
prompts walk you through the test. In just a few minutes,
anyone can learn to use it!
On The Spot Diagnosis For Troubleshooting
ALL-TEST IV PRO
™
results are immediately displayed for field
evaluation. Our quick reference guide helps you make the call on
the spot. Answer the mechanical/electrical question immediately,
rule the motor “in” or “out”.
Data Collector With Companion Software
For PdM
The ALL-TEST IV PRO
™
has enough memory to store 500 tests
(more than a day’s work). Upload test results to your computer,
our software provides expert diagnosis, trending, and a wide
variety of printed or on screen reports.
Convenient–Test From The Motor
Control Center
Most tests on installed motors are done from the MCC, you can
test through over 1000 feet of cable. Even hard to reach motors
(overhead cranes, submersible pumps, etc) can be tested quickly
and easily. In many cases you do not even need to disconnect
from the drive output terminals! No need to test at the motor
terminals unless a fault is indicated.
Safe For Operators And Equipment
All tests are performed on de-energized circuits. Measurement
technology is low voltage and current, and completely non-
destructive. Regular and repeated testing will not affect the
life of the windings.
Quickly Evaluates The Entire Motor Circuit
A single 2 minute test evaluates the windings, cabling, and
connections. Additional tests let you evaluate the rotor, and
capacitors, and cabling to pinpoint the fault.
All Test Pro 5 Manual
Sensitive
Detects motor faults at their earliest stages. Even detects
conditions such as deteriorating or contaminated insulation.
Light Weight And Hand Held
The instrument weighs under 2 lbs, is battery powered and hand-
held. No need to take a cart when you test a motor. And it can
test virtually any size motor.
Tests All Kinds Of Motors And Coil Based
Devices
• All types of motors: induction, synchronous, DC, brushless
DC, servo, wound rotor, even single phase motors.
• All Components: induction windings and rotors, DC
shunt and field windings, armatures, Field and rotor coils
in synchronous motors.
• Transformers: Single and 3-phase, pole and pad mounted.
ALL-TEST IV PRO
™
Testing the electrical health of a motor/pump combination
lets you make a better repair/replace decision.
All Test Pro 5 Cost
A 2-minute test from the MCC evaluates the windings, cabling,
and connections through even hundreds of feet of cable.